Model No.: 200Vet Infusion Pump |
Flow rate range |
0.1~1200 ml/h. Micro mode: 0.1-99.9 ml/hr in 0.1 ml increments |
Infusion mode |
rate mode, drip mode ( ml/h and drops/min can be switched) |
Volume to be infused (VTBI) |
0 ~ 9999 ml |
|
Volume Infused (∑) |
0 ~36000 ml |
Infusion accuracy |
±5% |
Applicable infusion set |
Support a wide variety brands of infusion set including major manufacturers & selected local brands |
KVO rate |
1 ~ 5 ml/h |
Bolus rate |
300 ~ 1200 ml/h |
Purge |
600 ml/h |
|
Air bubble detection |
Ultrasound sensor detection with four levels of air in line alarm adjustable |
Occlusion pressure |
3 adjustable occlusion pressure settings: low, middle and high |
|
Alarms |
Visual and audible alarms: Door open, Air-In-Line, Occlusion, Infusion completion, infusion near over, Start reminder function, Low Battery, Battery depleted, malfunction etc. |
Computer Interface |
RS232 (optional) |
History records |
2000 history records |
Power supply |
AC:100~240V,50/60Hz DC:12V ±1V |
Battery |
Rechargeable lithium polymer battery,7.4V,2100mAh |
Can operate for more than 3 hours after fully charged at 25ml/h. |
Battery recharge time |
10hs recharging when machine is turned on, 3hs recharging when machine is off. |
Power consumption |
25VA |
Classification |
Class I, type CF |
Water Proof Level |
IP×3 |
Mode of operation |
continuous |
Dimensions |
145×100×120 mm(length×width×height) |
Displaying mode |
4.3 inch high resolusion LED displaying screen |
Operating conditions |
Temperature:5°C~40°C,relative humidity:10~95%, |
air pressure:86~106kPa |
Transport conditions |
Temperature-20°C~+60°C,relative humidity:10~95%, |
air pressure:50~106kPa |
Storage conditions |
Temperature-20°C~+45°C,relative humidity:10~95%, |
air pressure:50~106kPa |